Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

Lowpass and bandpass transadmittance filter using operational amplifier pole

A new topology simultaneously implementing lowpass (LP) and bandpass (BP) transadmittance filtering signals using a single operational amplifier (OA), one capacitor, and two resistors is presented. The input impedance is very high which is essential for cascading without employment of buffers. The circuit uses absolute minimum number of active and passive components. The filter employs pole-model of OA and as such has acquired suitability for extended frequency operation. The circuit permits separate adjustment of natural frequency (ω₀) and quality factor (Q) in an orthogonal manner. The circuit has low sensitivity figures unlike the reported single amplifier biquads. The PSPICE simulation results are included.     

Fault tolerance in FFT arrays: Time redundancy approaches

Fault tolerance in VLSI/WSI FFT arrays acquires relevance when defects and run-time faults become significant, due to large dimensions of processors and arrays. Then, both restructuring to overcome end-of-production defects and reconfiguration to overcome run-time faults are required, to achieve the dual purposes of higher yield and higher reliability.Adopting as basic FFT network the two-dimensions array that directly corresponds to the FFT flow graph, the usual structure redundancy techniques tailored for two-dimensions arrays reconfiguration are not well applicable, since the limited locality of this network leads to relevant area increase due to the augmented interconnection structure.In this paper,time redundancy is suggested as a viable alternative for the two-dimensions FFT array; two different solutions are presented, one based oninter-stage reconfiguration, the other one adoptingintra-state reconfiguration, both allowing for survival to multiple faults with limited increase of network complexity and very small hard-core sections. As usual in many time redundancy methods, both approaches result in a processing speed equal to half the processing speed granted by an ideal, fault-free device.Reliability and survival ratios to multiple faults are evaluated for the two cases, taking into account also the area increments necessary for fault tolerance. The reliability evaluations allow for a direct comparison of the two solutions.     

Identification, ontogeny, and regulation of an interleukin-6-like factor in the rat seminiferous tubule

The present study's aims are to search for the presence of interleukin-6 bioactivity (IL-6) in medium conditioned by various testicular cell types and to investigate the cellular and hormonal regulation of testicular IL-6 production. Sertoli cells prepared from rats of increasing ages (20, 35, and 45 days) secreted IL-6 in vitro, whereas medium conditioned by pachytene spermatocytes, early spermatids, and peritubular cells showed no activity. Lipopolysaccharide (LPS) and latex beads, two known stimulators of monocyte/macrophage IL-6 production, markedly stimulated IL-6 secretion by Sertoli cells at all the ages investigated. Maximum levels of IL-6 were reached after 6 h of culture of Sertoli cells with LPS and after 24 h with latex beads. When Sertoli cells were cocultured with pachytene spermatocytes, early spermatids, or fractions containing residual bodies and cytoplasts from elongated spermatids, only the latter significantly stimulated IL-6 levels. Maximum levels of IL-6 were attained by adding 2 x 10(6) residual bodies to Sertoli cells; a significant increase in IL-6 secretion was seen after 6 h, and maximum levels were observed after 24 h. The levels of IL-6 varied throughout different stages of the seminiferous epithelium cycle; highest levels were observed in stages II-VI and lowest in stages VII-VIII. IL-6 bioactivities induced by LPS and residual bodies and cytoplasts from elongated spermatids could be totally neutralized with a specific monoclonal antibody at all of the ages studied. FSH, phorbol myristate acetate, and IL-1 alpha augmented Sertoli cell IL-6 secretion in a dose-dependent manner. Furthermore, FSH and (Bu)2cAMP differentially stimulated IL-6 secretion during the seminiferous epithelial cycle. It is concluded that the release of IL-6 from Sertoli cells is regulated by a complex interplay between residual bodies and humoral factors.     

Chemical composition and nutritional quality of tehineh (sesame butter)

The chemical composition and nutritional quality of tehineh, a paste of dehulled roasted sesame seeds, from Saudi Arabia and other countries, were studied. Results showed 24.7% protein, 58.9% fat, 2.3% fiber, 3.0% ash and <1.0% moisture. The tehineh contained relatively high amounts (mg/100 g) of P (692), Mg (362), Fe (7.19), Cu (1.96), Mn (1.46) and Zn (7.82) and low amounts of Ca (61) and Se (0.05). Gas-liquid chromatography (GLC) analysis of the oil revealed percentages of 42.4 for oleic, 39.7 for linoleic, 9.8 for palmitic and 6.4 for stearic acid. Lysine was the only limiting amino acid with a chemical score of 64, while the sulphur-containing amino acids (methionine + cystine) and tryptophan were present in amounts exceeding the requirement of the FAO/WHO (1973) reference protein. The in vitro protein digestibility (IVPD) value of 83.3% and the calculated protein efficiency ratio (C-PER), 2.14, were slightly higher than those of sesame seeds and both values were lower than the IVPD and C-PER of 90.0% and 2.50, respectively, for ANRC casein.     

Distal dorsal forearm flap

Reinstatement and spontaneous recovery of previously extinguished nicotine-taking behavior were examined in rats. Male subjects were trained to self-administer nicotine (30 microg/kg per infusion, IV; one 60-min session per day for 3 weeks). Extinction sessions were then given for 5-10 days during which saline was substituted for nicotine. Subsequently, in the first set of tests for nicotine seeking, the reinstatement of lever presses that previously delivered nicotine was examined after priming injections of saline and nicotine (75, 150 and 300 microg/kg, SC; and 30 and 60 microg/kg, IV). In the second set of tests for nicotine-seeking, rats were tested after an additional 21-day drug-free period during which they were not exposed to the self-administration chambers (a test for the spontaneous recovery of drug seeking), and after priming injections of nicotine (150 and 300 microg/kg, SC). Reinstatement of extinguished food-reinforced behavior after exposure to nicotine was also determined. Priming injections of nicotine reinstated nicotine seeking regardless of the route of administration. In addition, previously extinguished nicotine seeking recovered spontaneously after a 21-day period during which rats were not exposed to the drug-taking environment. Nicotine also reinstated extinguished food-reinforced behavior in rats with a history of nicotine self-administration, but not in drug-naive rats. The present results extend previous work with opioid and stimulant drugs on reinstatement of drug seeking by the self-administered drug. It also appears that, as with other positive reinforcers, the mere passage of time is a sufficient condition for the spontaneous recovery of extinguished nicotine seeking.     

Design and control of an olefin metathesis reactive distillation column

This paper considers the design and control of a reactive distillation column in which one reactant is consumed and two products are formed (A?B+C). The volatilities are α_B>α_A>α_C, i.e. the reactant is intermediate boiling between the two products. The metathesis of 2-pentene is considered as the demonstrative example. The column has a single feed of the intermediate boiling reactant. The distillate contains mostly light component and the bottoms mostly heavy.Three designs are considered: the base case (low-conversion/low-pressure), a low-conversion/high-pressure case and a high-conversion/high-pressure case. The base design is obtained from the literature, and the other two steady-state designs are optimized with respect to the total annual cost. All the designs are found to be openloop stable. Five control structures are studied for the base design. Then the best two structures are applied to the remaining two designs. This category of reactive distillation exhibits less challenging problems than other categories since it uses a single feed, which eliminates the need for the control structure to perfectly balance two fresh feeds.Simulation results demonstrate that effective dynamic control is provided by a control structure that uses two temperatures to maintain the purities of both product streams. No internal composition measurement is required. This structure is found to be robust and stable and rejects loads and tracks setpoints very well.     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.